Send Message
ShenZhen Adia Techology CO.,LTD
ShenZhen Adia Techology CO.,LTD
products
Home /

products

6 Bit RGB 3.5 Inch Sunlight Readable TFT For Handheld PDA

Product Details

Place of Origin: china

Brand Name: Sharp

Certification: RoHS

Model Number: LQ035Q7DB03F

Payment & Shipping Terms

Minimum Order Quantity: 10pcs

Price: USD 11-12/ PCS

Packaging Details: 50cm*50cm*60cm

Delivery Time: 20-25

Supply Ability: 10KK/M

Get Best Price
Contact Now
Specifications
Highlight:

3.5 Inch Sunlight Readable TFT

,

6 Bit RGB Sunlight Readable TFT

,

Handheld PDA Industrial TFT Display

Diagonal Size:
3.5 Inch
Type:
A-Si TFT-LCD , LCM
Pixel Format:
240(RGB)×320 [QVGA] 113PPI
Configuration:
RGB Vertical Stripe
Treatment:
Hard Coating (3H)
Frame Rate:
60Hz
Power Supply:
5.0/3.3/15.0/-10.0V (Typ.)(VSHA/VSHD/VDD/VEE)
Interface Type:
Parallel RGB (1 Ch, 6-bit) 50 Pins FPC
Diagonal Size:
3.5 Inch
Type:
A-Si TFT-LCD , LCM
Pixel Format:
240(RGB)×320 [QVGA] 113PPI
Configuration:
RGB Vertical Stripe
Treatment:
Hard Coating (3H)
Frame Rate:
60Hz
Power Supply:
5.0/3.3/15.0/-10.0V (Typ.)(VSHA/VSHD/VDD/VEE)
Interface Type:
Parallel RGB (1 Ch, 6-bit) 50 Pins FPC
Description
6 Bit RGB 3.5 Inch Sunlight Readable TFT For Handheld PDA

SHARP 3.5 inch Industrial TFT Display 6 Bit RGB Interface For handheld PDA

 

      The LQ035Q7DB03F is a 3.5-inch LCD module product using a-Si TFT-LCD technology from Sharp, with an integral WLED backlight system, no backlight driver, and no touch screen. Panelook summarizes its typical features as: portrait mode, transflective, white LED backlight, up/down, left/right flip display, AD-TFT (Advanced TFT). Its working temperature is -10 ~ 60°C, and its storage temperature is -25~ 70°C. The display resolution of LQ035Q7DB03F is 240(RGB)×320 (QVGA), the aspect ratio is 3:4 (width:height), and the pixels are arranged in RGB vertical stripes. Its display area size is 53.64×71.52 (width×height) mm, the visual size is 57.4×75.2 (width×height) mm, the appearance size is 65(width)×85(height)×3.7(thickness) mm, and the surface The treatment is Hard coating (3H), and the net weight of the product is 40.0g (Typ.). As for the backlight, this product adopts an edge-lit WLED light source. The lifespan of the light source is 10K hours, without backlight driver. LQ035Q7DB03F uses Parallel RGB (1 ch, 6-bit) signal interface, a total of 50 pins, which are connected by FPC, and the driving voltage is 5.0/3.3/15.0/-10.0V (Typ.) (VSHA/VSHD/VDD/VEE) . Its typical vertical refresh rate Fv is 60Hz.

 

General Specifications

 

NO. Item Specification Unit Remark
1 LCD Size 3.5 inch -
2 Panel Type a-Si TFT-LCD - -
3 Resolution 240x (RGB) x 320 pixel -
4 Display Mode Normally Black - -
5 Display Number of Colors 262K - Note
6 Viewing Direction 6 o'clock - -
7 Contrast Ratio 85:1 (Typ.) (TM) 15:1 (Typ.) (RF) - -
8 Luminance 55 cd/m² (Typ.) cd/m2 Note
9 Outline Dim 65(H)×85(V) ×3.7(D) mm mm Note
10 Active Area 53.64(H)×71.52(V) mm mm -
11 Bezel Area 7.4(H)×75.2(V) mm mm -
12 Weight 40.0g (Typ.) g -
13 Operating Mode TN, Normally White, Transflective - -
14 Touch Panel Without bit -
15 Light Source WLED , 10K hours , W/O Driver - -
16 Interface Type Parallel RGB (1 ch, 6-bit) 50 pins FPC - -
17 Operating Temperature -10~60 ºC -
18 Storage Temperature -25~70 ºC -

 

Outline Dimension (unit: mm)

 

6 Bit RGB 3.5 Inch Sunlight Readable TFT For Handheld PDA 0

6 Bit RGB 3.5 Inch Sunlight Readable TFT For Handheld PDA 1

6 Bit RGB 3.5 Inch Sunlight Readable TFT For Handheld PDA 2

 

 

Related Products

 

      TFT-LCM(mm)          
Size Model No. Resolution H V T Golden finger spacing Interface PIN IC
3.5 YT035H035 320x480 53.34 83.31 2.04 P0.8/W0.4 MCU16bit 37 ILI9486L
3.5 YT035H036 320x480 53.34 83.31 2.04 P1.0/W0.5 MCU16bit 37 ILI9486L
3.5 YT035K036 320x480 53.34 83.31 2.04 P1.0/W0.5 MCU16bit 37 ILI9486L
3.5 YT035HT037 320x480 54.66 82.94 3.25 P1.0/W0.5 MCU18bit 45 ILI9486L
3.5 YT035H040 320x480 53.34 83.31 2.04 P0.8/W0.4 MCU16bit 44 ILI9486L
3.5 YT035H041 320x480 53.34 83.31 2.04 P0.6/W0.3 MCU16bit 39 ILI9486L
3.5 YT035HT048 320x480 54.46 82.94 3.35 P0.8/W0.4 MCU8bit 44 ILI9486L
3.5 YT355HT049 240x400 52.00 88.40 3.5 P0.8/W0.4 MCU18bit 28 ILI9327
3.5 YT035H050 320x480 54.66 82.94 2.05 P1.0/W0.5   40 ILI9486L
3.5 YT035HT051 320x480 54.90 82.94 3.40 P0.8/W0.4 MCU16bit 41 ILI9486L
3.5 YT035H051-V1 320x480 54.90 82.94 2.20 P0.8/W0.4   41 ILI9486L
3.5 YT035HT053 320x480 54.90 82.94 3.40 P0.6/W0.3 MCU16bit 39 ILI9486L
3.5 YT035H054 320x480 54.90 82.94 2.20 P0.8/W0.4 MCU8BIT 39 ILI9486L
3.5 YT035H054-V1 320x480 54.90 82.94 2.20 P0.8/W0.4 MCU8BIT 39 ILI9486L
3.5 YT035H055 320x480 54.46 82.94 2.10 P1.0/W0.5 MCU16bit 40 ILI9486L
3.5 YT035H056 320x480 54.46 82.94 2.15 P0.8/W0.4 RGB18bit 45 ILI9486L

 

Why Choose us:

 

1.Our company established in 2011, and have a long-term cooperation with many well-known company.

2.We have a professional r&d team and technical support.

3.We have a large number of spot inventory and we can ship delivery asap after payment.

4.We are direct agent of these brands,ordering process simple and delivery time short.

5.All screen ship from our company has long warranty and we have enough technical support can provide after-sales service.

 

PRECAUTIONS

 

1.HANDLING

 

1.1.Polarizer Cleaning, Petroleum ether (or N-hexane) is recommended for cleaning the front/rear polarizers and reflectors, acetone, toluene and ethanol are not allowed to avoid damaging the surface.

1.2. Body grounding, must wear Anti-ESD wrist strap while pick up LCDs.

1.3. FPC Soldering, less than 300℃/3S, solder must be grounding on grounding bench.

1.4. If use electric Screwdriver to do assembly, screwdriver must be grounding.

 

2.STORAGE

 

2.1. Keep in a sealed polyethylene bag.

2.2. Keep in a dark place.

2.3. Keep in temperature between 0°C and 35°C.

NOT allowed at 70°C for more than 160 Hours, or at -20°C for more than 48 Hrs.

 

3.SAFETY

 

If liquid crystal leak out of a damaged glass cell, DO NOT put it in your mouth or touch eyes, if the liquid crystal touch your skin or clothes, please wash it off immediately using soap and water.

 

4.LIMITED WARRANTY

 

Unless otherwise agreed between ADIA and customer, ADIA will replace or repair any of its LCD modules which are found to be functionally defective when inspected in accordance with ADIA LCD acceptance standards (copies available upon request) for a period of one year from date of shipments. Cosmetic/visual defects over specs must be returned to ADIA within 30 days of shipment. Confirmation of such date shall be based on freight documents. The warranty liability of ADIA limited to repair and/or replacement on the terms set forth above. ADIA shall not be responsible for any subsequent or consequential events.

 

4.1RETURNING LCM UNDER WARRANTY – TERMS AND CONDITIONS

 

4.1.No warranty can be granted if the precautions stated above have been disregarded. The typical examples of violations are :

- Broken LCD glass.

- Circuit modified in any way, including addition of components.

4.2.Module repairs will be invoiced to the customer upon mutual agreement. Modules must be returned with sufficient description of the failures or defects. Any connectors or cable installed by the customer must be removed completely without damaging the PCB’s eyelet, conductors and terminals.

 

FAQ

 

 

Q1. How can I trust your product quality?

A:

--Our Raw materials are all ROHS compliant .

--Display is an ISO9001:2008 and ISO9001:2015 Certified company, we’ve been adhering to the ISO standards strictly in our production.

--Our products are 100% Visual and Function test before shipments.

Meanwhile, we do necessary Aging test and Reliability tests to our TFT Display modules, eg. Store and Operate in High and Low Temperature & High Humidity Environment, ESD and anti-interference test , Drop(with package) and Vibration Test.

Our Touch Screens goes through Salt spray test, Hardness test, Steel ball Drop test, Flatness test, Thermal shock test…

--Our experience and proficiency make the qualification rate always being 99.7% or above.

 

Q2. Which sizes of LCDs and Touch Panels do you provide?

A:

--Small sizes which include: 0.96, 1.22, 1.3, 1.44, 1.54, 1.77, 2.0, 2.4, 2.7, 2.8, 3.0, 3.2, 3.5, 3.95, 3.97, 4.3, 5, 5.6, 6.86.

--Middle sizes which include: 7, 8, 9, 10.1, 10.2, 13.3”,14.1",15.6",17",21.5",23

 

Q3. Can I have a sample order of before formal order?
A: Yes, sample order is always welcome for new projects or replacement of running projects. We have stock of many standard models of TFT LCD modules and Touch screens from 0.96inch to 13.3inch , which means delivery is able to be made the same day as order.

 

Q4. What is the lead time for Sample order and Mass Production order?
A:
--For LXDisplay standard products, the lead time for samples is usually 1-7 days, for mass production it could be as fast as 10 days.

--For Customized products,

We are able to get new FPC ready in 7days, new Backlight in 15days, and new Capacitive touch panel or Resistive touch panel in 18days.

Mass production of special products could be as fast as 3weeks.

--In summary, based on our years of big output, we have been keeping good relationship with LCD panel, IC and other material suppliers, we had a steady supply even when there was heavy shortage of materials.

 

Q5. Do you have MOQ requirement?
A: Yes, it depends on different sizes of products. Please refer to our sales, thanks.

 

Q6. How do I work with you on Customized products?
A: Firstly please provide us the description of your special requirements, any Drawing or Specification---Our engineers will work out the compatible solution and also mould cost (if any)---We provide Drawing and Specification for Approval---We provide samples for approval after reliability test and aging test---We make modification if necessary---We do small quantity of trial order (if required)---We do mass production.

 

Q7. Can I have my own silk screen Logo, Part Number or small label?
A: Yes, Definitely. It may requires MOQ, please refer to our sales, thanks.

 

Q8.How long is the warranty and what is your after-sales service?
A: Usually 12 Months.

If there is any defect within 12months from receiving products, please contact our sales, we will respond within 24hours. If we require any product to be returned to us, the shipping cost will be fully paid by us.

 

Q9. Do you have any shipping account and can you quote favorable shipping cost?

A: Yes, we have been working with DHL, Fedex more than 11 years, our shipping accounts were granted discount as much as 85% off . Please feel free to ask our sales no matter it is sample or formal order shipment.

 

Send your inquiry
Please send us your request and we will reply to you as soon as possible.
Send