Send Message
ShenZhen Adia Techology CO.,LTD
ShenZhen Adia Techology CO.,LTD
products
Home /

products

NEC 4.1 Inch 800x480 LTPS TFT LCD Displays Module 16.7M Color

Product Details

Place of Origin: china

Brand Name: NEC

Certification: RoHS

Model Number: NL8048HL11-01B

Payment & Shipping Terms

Minimum Order Quantity: 10pcs

Price: USD 13-15/ PCS

Packaging Details: 50cm*50cm*60cm

Delivery Time: 20-25

Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram

Supply Ability: 1kk/m

Get Best Price
Contact Now
Specifications
Highlight:

LTPS TFT LCD Displays

,

800x480 TFT LCD Displays

,

NEC TFT LCD Screen

Size:
4.1 Inch
Screen Type:
LCM, LTPS TFT-LCD
Color Depth:
16.7M 70% NTSC
Treatment:
Clear, Hard Coating (3H)
Response:
8/17 (Typ.)(Tr/Td) Ms
Refresh Rate:
60Hz
Signal Type:
CMOS (1 Ch, 8-bit) + SPI , FPC 51 Pins
DVoltage Supply:
3.0/3.0V (Typ.)(VCC/VCCIO)
Size:
4.1 Inch
Screen Type:
LCM, LTPS TFT-LCD
Color Depth:
16.7M 70% NTSC
Treatment:
Clear, Hard Coating (3H)
Response:
8/17 (Typ.)(Tr/Td) Ms
Refresh Rate:
60Hz
Signal Type:
CMOS (1 Ch, 8-bit) + SPI , FPC 51 Pins
DVoltage Supply:
3.0/3.0V (Typ.)(VCC/VCCIO)
Description
NEC 4.1 Inch 800x480 LTPS TFT LCD Displays Module 16.7M Color

NEC 4.1 inch 800xRGBx480 LTPS TFT-LCD Displays Module 16.7M Color

 

       The NL8048HL11-01B is a 4.1 inch LCD module product using LTPS TFT-LCD technology from NEC (NEC), which is equipped with a WLED backlight, no backlight driver, and a 4-wire resistive touch screen. With touch screen, white LED backlight, up/down, left/right flip display, VIT. Its working temperature is -20 ~ 70°C, storage temperature is -30 ~ 80°C, and its vibration resistance is 2.0G (19.6 m/s²).

 

Features


1.0.5t Glass
2.Thin and light weight
3.Low Power consumption, High trans, High CR, Wide view angle
4.RoHS Compliant

 

Application

 

Mainly used in handheld terminals and PDAs.

 

 

 

 

General Specifications

 

NO. Item Specification Unit Remark
1 LCD Size 4.1 inch -
2 Panel Type LCM,LTPS TFT-LCD - -
3 Resolution 800(RGB)×480(WVGA) 228PPI pixel -
4 Display Mode TN, Normally White, Transmissive - -
5 Display Number of Colors 16.7M 70% NTSC - Note
6 Viewing Direction 80/80/60/80 (Typ.)(CR≥10) - -
7 Good View at 12 o'clock    
8 Contrast Ratio 400 : 1 (Typ.) (TM) - -
9 Luminance 350 cd/m² (Typ.) cd/m2 Note
10 Module Size 99.6 × 69.5 × 7.2 (H×V×D) mm Note
11 Active Area 88.8 × 53.28 (H×V) mm -
12 Bezel Area(mm) 92.8 × 57.28 (H×V) mm -
13 Weight 70.0/73.0g (Typ./Max.) g -
14 Touchscreen 4-wire Resistive Touch - -
15 Arrangement RGB Vertical Stripe - -
16 Backlight 2 strings WLED , 10K hours , No Driver - -
17 Interface CMOS (1 ch, 8-bit) + SPI , FPC 51 pins - -
18 Operating Temperature -20~70°C ºC -
19 Storage Temperature -30~80°C ºC -

 

Outline Dimension (unit: mm)

 

NEC 4.1 Inch 800x480 LTPS TFT LCD Displays Module 16.7M Color 0

NEC 4.1 Inch 800x480 LTPS TFT LCD Displays Module 16.7M Color 1

NEC 4.1 Inch 800x480 LTPS TFT LCD Displays Module 16.7M Color 2

 

 


Related Products
 

      TFT-LCM(MM)          
Size Model No. Resolution H V T Golden finger spacing Interface PIN IC
3.97 YT040B047 240*400 57.14 96.85 3.3 P0.8/W0.4 8位 32 ST7793
3.97 YT040H018 480*800 58.18 99.15 2.2 P0.3 24位 51 HX8369-A00
3.97 YT040H023 480*800 58.18 99.15 2.30MAX P0.3 16BIT 51 HX8369-A00
3.97 YT040H026 480*800 58.18 99.15 2.30MAX BTB RGB+SPI 54 HX8369-A00
3.97 YT040H027 480*800 58.18 99.15 2.2 P0.3 24位 39 HX8369-A00
3.97 YT040H033 480*800 58.18 99.15 2.2 P0.3 RGB+SPI 51 HX8369-A00
3.97 YT040H038 480*800 58.18 99.15 2.2 P0.3 16位 45 HX8369-A00
3.97 YT040H044 480*800 58.18 99.15 2.2  BTB 24位 40 HX8369-A01

 

Why Choose us:

1.Our company established in 2011, and have a long-term cooperation with many well-known company.

2.We have a professional r&d team and technical support.

3.We have a large number of spot inventory and we can ship delivery asap after payment.

4.We are direct agent of these brands,ordering process simple and delivery time short.

5.All screen ship from our company has long warranty and we have enough technical support can provide.

after-sales service.

 

 

PRECAUTIONS

 

1.HANDLING

 

1.1.Polarizer Cleaning, Petroleum ether (or N-hexane) is recommended for cleaning the front/rear polarizers and reflectors, acetone, toluene and ethanol are not allowed to avoid damaging the surface.

1.2. Body grounding, must wear Anti-ESD wrist strap while pick up LCDs.

1.3. FPC Soldering, less than 300℃/3S, solder must be grounding on grounding bench.

1.4. If use electric Screwdriver to do assembly, screwdriver must be grounding.

 

2.STORAGE

 

2.1. Keep in a sealed polyethylene bag.

2.2. Keep in a dark place.

2.3. Keep in temperature between 0°C and 35°C.

NOT allowed at 70°C for more than 160 Hours, or at -20°C for more than 48 Hrs.

 

3.SAFETY

 

If liquid crystal leak out of a damaged glass cell, DO NOT put it in your mouth or touch eyes, if the liquid crystal touch your skin or clothes, please wash it off immediately using soap and water.

 

4.LIMITED WARRANTY

 

Unless otherwise agreed between ADIA and customer, ADIA will replace or repair any of its LCD modules which are found to be functionally defective when inspected in accordance with ADIA LCD acceptance standards (copies available upon request) for a period of one year from date of shipments. Cosmetic/visual defects over specs must be returned to ADIA within 30 days of shipment. Confirmation of such date shall be based on freight documents. The warranty liability of ADIA limited to repair and/or replacement on the terms set forth above. ADIA shall not be responsible for any subsequent or consequential events.

 

4.1RETURNING LCM UNDER WARRANTY – TERMS AND CONDITIONS

 

4.1.No warranty can be granted if the precautions stated above have been disregarded. The typical examples of violations are :

- Broken LCD glass.

- Circuit modified in any way, including addition of components.

4.2.Module repairs will be invoiced to the customer upon mutual agreement. Modules must be returned with sufficient description of the failures or defects. Any connectors or cable installed by the customer must be removed completely without damaging the PCB’s eyelet, conductors and terminals.

 

FAQ

 

Q1. How can I trust your product quality?

A:

--Our Raw materials are all ROHS compliant .

--Display is an ISO9001:2008 and ISO9001:2015 Certified company, we’ve been adhering to the ISO standards strictly in our production.

--Our products are 100% Visual and Function test before shipments.

Meanwhile, we do necessary Aging test and Reliability tests to our TFT Display modules, eg. Store and Operate in High and Low Temperature & High Humidity Environment, ESD and anti-interference test , Drop(with package) and Vibration Test.

Our Touch Screens goes through Salt spray test, Hardness test, Steel ball Drop test, Flatness test, Thermal shock test…

--Our experience and proficiency make the qualification rate always being 99.7% or above.

 

Q2. Which sizes of LCDs and Touch Panels do you provide?

A:

--Small sizes which include: 0.96”, 1.22”, 1.3”, 1.44”, 1.54”, 1.77”, 2.0”, 2.4”, 2.7”, 2.8”, 3.0”, 3.2”, 3.5”, 3.95”, 3.97”, 4.3”, 5”, 5.6”, 6.86”.

--Middle sizes which include: 7”, 8”, 9”, 10.1”, 10.2”, 13.3”,14.1",15.6",17",21.5",23

 

Q3. Can I have a sample order of before formal order?
A: Yes, sample order is always welcome for new projects or replacement of running projects. We have stock of many standard models of TFT LCD modules and Touch screens from 0.96inch to 13.3inch , which means delivery is able to be made the same day as order.

 

Q4. What is the lead time for Sample order and Mass Production order?
A:
--For LXDisplay standard products, the lead time for samples is usually 1-7 days, for mass production it could be as fast as 10 days.

--For Customized products,

We are able to get new FPC ready in 7days, new Backlight in 15days, and new Capacitive touch panel or Resistive touch panel in 18days.

Mass production of special products could be as fast as 3weeks.

--In summary, based on our years of big output, we have been keeping good relationship with LCD panel, IC and other material suppliers, we had a steady supply even when there was heavy shortage of materials.

 

Q5. Do you have MOQ requirement?
A: Yes, it depends on different sizes of products. Please refer to our sales, thanks.

 

Q6. How do I work with you on Customized products?
A: Firstly please provide us the description of your special requirements, any Drawing or Specification---Our engineers will work out the compatible solution and also mould cost (if any)---We provide Drawing and Specification for Approval---We provide samples for approval after reliability test and aging test---We make modification if necessary---We do small quantity of trial order (if required)---We do mass production.

 

Q7. Can I have my own silk screen Logo, Part Number or small label?
A: Yes, Definitely. It may requires MOQ, please refer to our sales, thanks.

 

Q8.How long is the warranty and what is your after-sales service?
A: Usually 12 Months.

If there is any defect within 12months from receiving products, please contact our sales, we will respond within 24hours. If we require any product to be returned to us, the shipping cost will be fully paid by us.

 

Q9. Do you have any shipping account and can you quote favorable shipping cost?

A: Yes, we have been working with DHL, Fedex more than 11 years, our shipping accounts were granted discount as much as 85% off . Please feel free to ask our sales no matter it is sample or formal order shipment.

 

 

Send your inquiry
Please send us your request and we will reply to you as soon as possible.
Send